HANDY ONE-LINERS FOR SED (Unix stream editor) Mar. 23, 2001.compiled by Eric Pement <
[email protected]> version 5.1 .Latest version of this file is usually at:
http://www.student.northpark.edu/pemente/sed/sed1line.txt
http://www.cornerstonemag.com/sed/sed1line.txt
This file is also available in Portuguese at:
http://www.lrv.ufsc.br/wmaker/sed_ptBR.Html
FILE SPACING-----------------:
# double space a file
sed G
# double space a file which already has blank lines in it. Output file
# should contain no more than one blank line between lines of text.
sed \'/^$/d;G\'
# triple space a file
sed \'G;G\'
# undo double-spacing (assumes even-numbered lines are always blank)
sed \'n;d\'
NUMBERING:
# number each line of a file (simple left alignment). Using a tab (see
# note on \'\\t\' at end of file) instead of space will preserve margins.
sed = filename sed \'N;s/\\n/\\t/\'
# number each line of a file (number on left, right-aligned)
sed = filename sed \'N; s/^/ /; s/ *\\(.\\{6,\\}\\)\\n/\\1 /\'
# number each line of file, but only print numbers if line is not blank
sed \'/./=\' filename sed \'/./N; s/\\n/ /\'
# count lines (emulates \"wc -l\")
sed -n \'$=\'
TEXT CONVERSION AND SUBST99vUTION:
# IN UNIX ENVIRONMENT: convert DOS newlines (CR/LF) to Unix format
sed \'s/.$//\' # assumes that all lines end with CR/LF
sed \'s/^M$//\' # in bash/tcsh, press Ctrl-V then Ctrl-M
sed \'s/\\x0D$//\' # gsed 3.02.80, but top script is easier
# IN UNIX ENVIRONMENT: convert Unix newlines (LF) to DOS format
sed \"s/$/`echo -e \\\\\\r`/\" # command line under ksh
sed \'s/$\'\"/`echo \\\\\\r`/\" # command line under bash
sed \"s/$/`echo \\\\\\r`/\" # command line under zsh
sed \'s/$/\\r/\' # gsed 3.02.80
# IN DOS ENVIRONMENT: convert Unix newlines (LF) to DOS format
sed \"s/$//\" # method 1
sed -n p # method 2
# IN DOS ENVIRONMENT: convert DOS newlines (CR/LF) to Unix format
# Cannot be done with DOS versions of sed. Use \"tr\" instead.
tr -d \\r <infile >outfile # GNU tr version 1.22 or higher
# delete leading whitespace (spaces, tabs) from front of each line
# aligns all text flush left
sed \'s/^[ \\t]*//\' # see note on \'\\t\' at end of file
# delete trailing whitespace (spaces, tabs) from end of each line
sed \'s/[ \\t]*$//\' # see note on \'\\t\' at end of file
# delete BOTH leading and trailing whitespace from each line
sed \'s/^[ \\t]*//;s/[ \\t]*$//\'
# insert 5 blank spaces at beginning of each line (make page offset)
sed \'s/^/ /\'
# align all text flush right on a 79-column width
sed -e :a -e \'s/^.\\{1,78\\}$/ &/;ta\' # set at 78 plus 1 space
# center all text in the middle of 79-column width. In method 1,
# spaces at the beginning of the line are significant, and trailing
# spaces are appended at the end of the line. In method 2, spaces at
# the beginning of the line are discarded in centering the line, and
# no trailing spaces appear at the end of lines.
sed -e :a -e \'s/^.\\{1,77\\}$/ & /;ta\' # method 1
sed -e :a -e \'s/^.\\{1,77\\}$/ &/;ta\' -e \'s/\\( *\\)\\1/\\1/\' # method 2
# substitute (find and replace) \"foo\" with \"bar\" on each line
sed \'s/foo/bar/\' # replaces only 1st instance in a line
sed \'s/foo/bar/4\' # replaces only 4th instance in a line
sed \'s/foo/bar/g\' # replaces ALL instances in a line
sed \'s/\\(.*\\)foo\\(.*foo\\)/\\1bar\\2/\' # replace the next-to-last case
sed \'s/\\(.*\\)foo/\\1bar/\' # replace only the last case
# substitute \"foo\" with \"bar\" ONLY for lines which contain \"baz\"
sed \'/baz/s/foo/bar/g\'
# substitute \"foo\" with \"bar\" EXCEPT for lines which contain \"baz\"
sed \'/baz/!s/foo/bar/g\'
# change \"scarlet\" or \"ruby\" or \"pUCe\" to \"red\"
sed \'s/scarlet/red/g;s/ruby/red/g;s/puce/red/g\' # most seds
gsed \'s/scarlet\\ruby\\puce/red/g\' # GNU sed only
# reverse order of lines (emulates \"tac\")
# bug/feature in HHsed v1.5 causes blank lines to be deleted
sed \'1!G;h;$!d\' # method 1
sed -n \'1!G;h;$p\' # method 2
# reverse each character on the line (emulates \"rev\")
sed \'/\\n/!G;s/\\(.\\)\\(.*\\n\\)/&\\2\\1/;//D;s/.//\'
# join pairs of lines side-by-side (like \"paste\")
sed \'$!N;s/\\n/ /\'
# if a line ends with a backslash, append the next line to it
sed -e :a -e \'/\\\\$/N; s/\\\\\\n//; ta\'
# if a line begins with an equal sign, append it to the previous line
# and replace the \"=\" with a single space
sed -e :a -e \'$!N;s/\\n=/ /;ta\' -e \'P;D\'
# add commas to numeric strings, changing \"1234567\" to \"1,234,567\"
gsed \':a;s/\\B[0-9]\\{3\\}\\>/,&/;ta\' # GNU sed
sed -e :a -e \'s/\\(.*[0-9]\\)\\([0-9]\\{3\\}\\)/\\1,\\2/;ta\' # other seds
# add commas to numbers with decimal points and minus signs (GNU sed)
gsed \':a;s/\\(^\\[^0-9.]\\)\\([0-9]\\+\\)\\([0-9]\\{3\\}\\)/\\1\\2,\\3/g;ta\'
# add a blank line every 5 lines (after lines 5, 10, 15, 20, etc.)
gsed \'0~5G\' # GNU sed only
sed \'n;n;n;n;G;\' # other seds
SELECTIVE PRINTING OF CERTAIN LINES:
# print first 10 lines of file (emulates behavior of \"head\")
sed 10q
# print first line of file (emulates \"head -1\")
sed q
# print the last 10 lines of a file (emulates \"tail\")
sed -e :a -e \'$q;N;11,$D;ba\'
# print the last 2 lines of a file (emulates \"tail -2\")
sed \'$!N;$!D\'
# print the last line of a file (emulates \"tail -1\")
sed \'$!d\' # method 1
sed -n \'$p\' # method 2
# print only lines which match regular eXPression (emulates \"grep\")
sed -n \'/regexp/p\' # method 1
sed \'/regexp/!d\' # method 2
# print only lines which do NOT match regexp (emulates \"grep -v\")
sed -n \'/regexp/!p\' # method 1, corresponds to above
sed \'/regexp/d\' # method 2, simpler syntax
# print the line immediately before a regexp, but not the line
# containing the regexp
sed -n \'/regexp/{g;1!p;};h\'
# print the line immediately after a regexp, but not the line
# containing the regexp
sed -n \'/regexp/{n;p;}\'
# print 1 line of context before and after regexp, with line number
# indicating where the regexp occurred (similar to \"grep -A1 -B1\")
sed -n -e \'/regexp/{=;x;1!p;g;$!N;p;D;}\' -e h
# grep for AAA and BBB and CCC (in any order)
sed \'/AAA/!d; /BBB/!d; /CCC/!d\'
# grep for AAA and BBB and CCC (in that order)
sed \'/AAA.*BBB.*CCC/!d\'
# grep for AAA or BBB or CCC (emulates \"egrep\")
sed -e \'/AAA/b\' -e \'/BBB/b\' -e \'/CCC/b\' -e d # most seds
gsed \'/AAA\\BBB\\CCC/!d\' # GNU sed only
# print paragraph if it contains AAA (blank lines separate paragraphs)
# HHsed v1.5 must insert a \'G;\' after \'x;\' in the next 3 scripts belo
# print the line immediately after a regexp, but not the line
# containing the regexp
sed -n \'/regexp/{n;p;}\'
# print 1 line of context before and after regexp, with line number
# indicating where the regexp occurred (similar to \"grep -A1 -B1\")
sed -n -e \'/regexp/{=;x;1!p;g;$!N;p;D;}\' -e h
# grep for AAA and BBB and CCC (in any order)
sed \'/AAA/!d; /BBB/!d; /CCC/!d\'
# grep for AAA and BBB and CCC (in that order)
sed \'/AAA.*BBB.*CCC/!d\'
# grep for AAA or BBB or CCC (emulates \"egrep\")
sed -e \'/AAA/b\' -e \'/BBB/b\' -e \'/CCC/b\' -e d # most seds
gsed \'/AAA\\BBB\\CCC/!d\' # GNU sed only
# print paragraph if it contains AAA (blank lines separate paragraphs)
# HHsed v1.5 must insert a \'G;\' after \'x;\' in the next 3 scripts belo
# grep for AAA or BBB or CCC (emulates \"egrep\")
sed -e \'/AAA/b\' -e \'/BBB/b\' -e \'/CCC/b\' -e d # most seds
gsed \'/AAA\\BBB\\CCC/!d\' # GNU sed only
# print paragraph if it contains AAA (blank lines separate paragraphs)
# HHsed v1.5 must insert a \'G;\' after \'x;\' in the next 3 scripts belo
