無意中在網上找到了一份關於sh與csh比較的資料(實際上原文叫Why no csh.),不知道有沒有在此貼過.但本人覺得so cool.不敢獨享.如果貼過我就再貼一次吧.如果沒有貼過那就最好.我也不用擔心被人說抄襲.如果你想轉載此文章,請保留原文的完整性.當然,我的屁話就不用轉了.
原文:
From comp.unix.shell Thu Sep 28 16:13:17 1995
Path: night.primate.wisc.edu!nntp.msstate.edu!gatech!news.sprintlink.net!in1.uu.net!boulder!csnews!mox!tchrist
From: Tom Christiansen <
[email protected]>
Newsgroups: comp.unix.shell,comp.unix.questions,comp.unix.programmer,comp.answers,news.answers,comp.infosystems.www.authoring.cgi
Subject: Csh Programming Considered Harmful
Followup-To: comp.unix.shell
Date: 28 Sep 1995 18:52:45 GMT
Organization: scant
Lines: 560
Approved:
[email protected]
EXPires: Fri, 1 Nov 1994 12:00:00 GMT
Message-ID: <
[email protected]>
NNTP-Posting-Host: perl.com
Originator: tchrist@mox
Xref: night.primate.wisc.edu comp.unix.shell:8718 comp.unix.questions:16357 comp.unix.programmer:10254 comp.answers:5900 news.answers:20987 comp.infosystems.www.authoring.cgi:10967
Archive-name: unix-faq/shell/csh-whynot
Version: $Id: csh-faq,v 1.7 95/09/28 12:52:17 tchrist Exp Locker: tchrist $
The following periodic article answers in excrUCiating detail
the frequently asked question "Why shouldn't I program in csh?".
It is available for anon FTP from perl.com in /pub/perl/versus/csh-whynot.gz
*** CSH PROGRAMMING CONSIDERED HARMFUL ***
Resolved: The csh is a tool utterly inadequate for programming,
and its use for such purposes should be strictly banned!
I am continually shocked and dismayed to see people write test cases,
install scripts, and other random hackery using the csh. Lack of
proficiency in the Bourne shell has been known to cause errors in /etc/rc
and .cronrc files, which is a problem, because you *must* write these files
in that language.
The csh is seductive because the conditionals are more C-like, so the path
of least resistance is chosen and a csh script is written. Sadly, this is
a lost cause, and the programmer seldom even realizes it, even when they
find that many simple things they wish to do range from cumbersome to
impossible in the csh.
1. FILE DESCRIPTORS
The most common problem encountered in csh programming is that
you can't do file-descriptor manipulation. All you are able to
do is redirect stdin, or stdout, or dup stderr into stdout.
Bourne-compatible shells offer you an abundance of more exotic
possibilities.
1a. Writing Files
In the Bourne shell, you can open or dup arbitrary file descriptors.
For example,
exec 2>errs.out
means that from then on, stderr goes into errs file.
Or what if you just want to throw away stderr and leave stdout
alone? Pretty simple operation, eh?
cmd 2>/dev/null
Works in the Bourne shell. In the csh, you can only make a pitiful
attempt like this:
(cmd > /dev/tty) >& /dev/null
But who said that stdout was my tty? So it's wrong. This simple
operation *CANNOT BE DONE* in the csh.
Along these same lines, you can't direct error messages in csh scripts
out stderr as is considered proper. In the Bourne shell, you might say:
echo "$0: cannot find $file" 1>&2
but in the csh, you can't redirect stdout out stderr, so you end
up doing something silly like this:
sh -c 'echo "$0: cannot find $file" 1>&2'
1b. Reading Files
In the csh, all you've got is $<, which reads a line from your tty. What
if you've redirected stdin? Tough noogies, you still get your tty, which
you really can't redirect. Now, the read statement
in the Bourne shell allows you to read from stdin, which catches
redirection. It also means that you can do things like this:
exec 3<file1
exec 4<file2
Now you can read from fd 3 and get lines from file1, or from file2 through
fd 4. In modern, Bourne-like shells, this suffices:
read some_var 0<&3
read another_var 0<&4
Although in older ones where read only goes from 0, you trick it:
exec 5<&0 # save old stdin
exec 0<&3; read some_var
exec 0<&4; read another_var
exec 0<&5 # restore it
1c. Closing FDs
In the Bourne shell, you can close file descriptors you don't
want open, like 2>&-, which isn't the same as redirecting it
to /dev/null.
1d. More Elaborate Combinations
Maybe you want to pipe stderr to a command and leave stdout alone.
Not too hard an idea, right? You can't do this in the csh as I
mentioned in 1a. In a Bourne shell, you can do things like this:
exec 3>&1; grep yyy xxx 2>&1 1>&3 3>&- sed s/file/Foobar/ 1>&2 3>&-
grep: xxx: No such foobar or Directory
Normal output would be unaffected. The closes there were in case
something really cared about all its FDs. We send stderr to sed,
and then put it back out 2.
Consider the pipeline:
A B C
You want to know the status of C, well, that's easy: it's in $?, or
$status in csh. But if you want it from A, you're out of luck -- if
you're in the csh, that is. In the Bourne shell, you can get it, although
doing so is a bit tricky. Here's something I had to do where I ran dd's
stderr into a grep -v pipe to get rid of the records in/out noise, but had
to return the dd's exit status, not the grep's:
device=/dev/rmt8
dd_noise='^[0-9]++[0-9]+ records (inout)$'
exec 3>&1
status=`((dd if=$device ibs=64k 2>&1 1>&3 3>&- 4>&-; echo $? >&4)
egrep -v "$dd_noise" 1>&2 3>&- 4>&-) 4>&1`
exit $status;
The csh has also been known to close all open file descriptors besides
the ones it knows about, making it unsuitable for applications that
intend to inherit open file descriptors.
2. COMMAND ORTHOGONALITY
2a. Built-ins
The csh is a horrid botch with its built-ins. You can't put them
together in many reasonable ways. Even simple little things like this:
% time echo
which while nonsensical, shouldn't give me this message:
Reset tty pgrp from 9341 to 26678
Others are more fun:
% sleep 1 while
while: Too few arguments.
[5] 9402
% jobs
[5] 9402 Done sleep
Some can even hang your shell. Try typing ^Z while you're sourcing
something, or redirecting a source command. Just make sure you have
another window handy. Or try
% history more
on some systems.
Aliases are not evaluated everywhere you would like them do be:
% alias lu 'ls -u'
% lu
HISTORY News bin fortran lib lyrics misc tex
Mail TEX dehnung hpview logs mbox netlib
% repeat 3 lu
lu: Command not found.
lu: Command not found.
lu: Command not found.
% time lu
lu: Command not found.
2b. Flow control
You can't mix flow-control and commands, like this:
who while read line; do
echo "gotta $line"
done
You can't combine multiline constructs in a csh using semicolons.
There's no easy way to do this
alias cmd 'if (foo) then bar; else snark; endif'
You can't perform redirections with if statements that are
evaluated solely for their exit status:
if ( { grep vt100 /etc/termcap > /dev/null } ) echo ok
And even pipes don't work:
if ( { grep vt100 /etc/termcap sed 's/$/###' } ) echo ok
But these work just fine in the Bourne shell:
if grep vt100 /etc/termcap > /dev/null ; then echo ok; fi
if grep vt100 /etc/termcap sed 's/$/###/' ; then echo ok; fi
Consider the following reasonable construct:
if ( { command1 command2 } ) then
...
endif
The output of command1 won't go into the input of command2. You will get
the output of both commands on standard output. No error is raised. In
the Bourne shell or its clones, you would say
if command1 command2 ; then
...
fi
2c. Stupid parsing bugs
Certain reasonable things just don't work, like this:
% kill -1 `cat foo`
`cat foo`: Ambiguous.
But this is ok:
% /bin/kill -1 `cat foo`
If you have a stopped job:
[2] Stopped rlogin globhost
You should be able to kill it with
% kill %?glob
kill: No match
but
% fg %?glob
works.
White space can matter:
if(expr)
may fail on some versions of csh, while
if (expr)
works! Your vendor may have attempted to fix this bug, but odds are good
that their csh still won't be able to handle
if(0) then
if(1) then
echo A: got here
else
echo B: got here
endif
echo We should never execute this statement
endif
3. SIGNALS
In the csh, all you can do with signals is trap SIGINT. In the Bourne
shell, you can trap any signal, or the end-of-program exit. For example,
to blow away a tempfile on any of a variety of signals:
$ trap 'rm -f /usr/adm/tmp/i$$ ;
echo "ERROR: abnormal exit";
exit' 1 2 3 15
$ trap 'rm tmp.$$' 0 # on program exit
4. QUOTING
You can't quote things reasonably in the csh:
set foo = "Bill asked, "How's tricks?""
doesn't work. This makes it really hard to construct strings with
mixed quotes in them. In the Bourne shell, this works just fine.
In fact, so does this:
cd /mnt; /usr/ucb/finger -m -s `ls `u``
Dollar signs cannot be escaped in double quotes in the csh. Ug.
set foo = "this is a $dollar quoted and this is $HOME not quoted"
dollar: Undefined variable.
You have to use backslashes for newlines, and it's just darn hard to
get them into strings sometimes.
set foo = "this
and that";
echo $foo
this and that
echo "$foo"
Unmatched ".
Say what? You don't have these problems in the Bourne shell, where it's
just fine to write things like this:
echo 'This is
some text that contains
several newlines.'
As distributed, quoting history references is a challenge. Consider:
% mail adec23!alberta!pixel.Convex.COM!tchrist
alberta!pixel.Convex.COM!tchri: Event not found.
5. VARIABLE SYNTAX
There's this big difference between global (environment) and local
(shell) variables. In csh, you use a totally different syntax
to set one from the other.
In the Bourne shell, this
VAR=foo cmds args
is the same as
(export VAR; VAR=foo; cmd args)
or csh's
(setenv VAR; cmd args)
You can't use :t, :h, etc on envariables. Watch:
echo Try testing with $SHELL:t
It's really nice to be able to say
${PAGER-more}
or
FOO=${BAR:-${BAZ}}
to be able to run the user's PAGER if set, and more otherwise.
You can't do this in the csh. It takes more verbiage.
You can't get the process number of the last background command from the
csh, something you might like to do if you're starting up several jobs in
the background. In the Bourne shell, the pid of the last command put in
the background is available in $!.
The csh is also flaky about what it does when it imports an
environment variable into a local shell variable, as it does
with HOME, USER, PATH, and TERM. Consider this:
% setenv TERM '`/bin/ls -l / > /dev/tty`'
% csh -f
And watch the fun!
6. EXPRESSION EVALUATION
Consider this statement in the csh:
if ($?MANPAGER) setenv PAGER $MANPAGER
Despite your attempts to only set PAGER when you want
to, the csh aborts:
MANPAGER: Undefined variable.
That's because it parses the whole line anyway AND EVALUATES IT!
You have to write this:
if ($?MANPAGER) then
setenv PAGER $MANPAGER
endif
That's the same problem you have here:
if ($?X && $X == 'foo') echo ok
X: Undefined variable
This forces you to write a couple nested if statements. This is highly
undesirable because it renders short-circuit booleans useless in
situations like these. If the csh were the really C-like, you would
expect to be able to safely employ this kind of logic. Consider the
common C construct:
if (p && p->member)
Undefined variables are not fatal errors in the Bourne shell, so
this issue does not arise there.
While the csh does have built-in expression handling, it's not
what you might think. In fact, it's space sensitive. This is an
error
@ a = 4/2
but this is ok
@ a = 4 / 2
The ad hoc parsing csh employs fouls you up in other places
as well. Consider:
% alias foo 'echo hi' ; foo
foo: Command not found.
% foo
hi
7. ERROR HANDLING
Wouldn't it be nice to know you had an error in your script before
you ran it? That's what the -n flag is for: just check the syntax.
This is especially good to make sure seldom taken segments of code
code are correct. Alas, the csh implementation of this doesn't work.
Consider this statement:
exit (i)
Of course, they really meant
exit (1)
or just
exit 1
Either shell will complain about this. But if you hide this in an if
clause, like so:
#!/bin/csh -fn
if (1) then
exit (i)
endif
The csh tells you there's nothing wrong with this script. The equivalent
construct in the Bourne shell, on the other hand, tells you this:
#!/bin/sh -n
if (1) then
exit (i)
endif
/tmp/x: syntax error at line 3: `(' unexpected
RANDOM BUGS
Here's one:
fg %?string
^Z
kill %?string
No match.
Huh? Here's another
!%s%x%s
Coredump, or garbage.
If you have an alias with backquotes, and use that in backquotes in
another one, you get a coredump.
Try this:
% repeat 3 echo "/vmu*"
/vmu*
/vmunix
/vmunix
What???
Here's another one:
% mkdir tst
% cd tst
% touch '[foo]bar'
% foreach var ( * )
> echo "File named $var"
> end
foreach: No match.
8. SUMMARY
While some vendors have fixed some of the csh's bugs (the tcsh also does
much better here), many have added new ones. Most of its problems can
never be solved because they're not actually bugs per se, but rather the
direct consequences of braindead design decisions. It's inherently flawed.
Do yourself a favor, and if you *have* to write a shell script, do it in the
Bourne shell. It's on every UNIX system out there. However, behavior
can vary.
There are other possibilities.
The Korn shell is the preferred programming shell by many sh addicts,
but it still suffers from inherent problems in the Bourne shell's design,
such as parsing and evaluation horrors. The Korn shell or its
public-domain clones and supersets (like bash) aren't quite so ubiquitous
as sh, so it probably wouldn't be wise to write a sharchive in them that
you post to the net. When 1003.2 becomes a real standard that companies
are forced to adhere to, then we'll be in much better shape. Until
then, we'll be stuck with bug-incompatible versions of the sh lying about.
The Plan 9 shell, rc, is much cleaner in its parsing and evaluation; it is
not widely available, so you'd be significantly sacrificing portability.
No vendor is shipping it yet.
If you don't have to use a shell, but just want an interpreted language,
many other free possibilities present themselves, like Perl, REXX, TCL,
Scheme, or Python. Of these, Perl is probably the most widely available
on UNIX (and many other) systems and certainly comes with the most
extensive UNIX interface. Increasing numbers vendors ship Perl with
their standard systems. (See the comp.lang.perl FAQ for a list.)
If you have a problem that would ordinarily use sed or awk or sh, but it
exceeds their capabilities or must run a little faster, and you don't want
to write the silly thing in C, then Perl may be for you. You can get
at networking functions, binary data, and most of the C library. There
are also translators to turn your sed and awk scripts into Perl scripts,
as well as a symbolic debugger. Tchrist's personal rule of thumb is
that if it's the size that fits in a Makefile, it gets written in the
Bourne shell, but anything bigger gets written in Perl.
See the comp.lang.{perl,rexx,tcl} newsgroups for details about these
languages (including FAQs), or David Muir Sharnoff's comparison of
freely available languages and tools in comp.lang.misc and news.answers.
NOTE: Doug Hamilton <
[email protected]> has a program that he sells for
profit for little toy non-UNIX systems. He calls it 'csh' or the
'hamilton csh', but it's not a csh as it's neither bug nor feature
compatible with the real csh. Actually, he's fixed a great deal, but
in doing so, has created a totally different shell.
--
Tom Christiansen Perl Consultant, Gamer, Hiker
[email protected]
profit for little toy non-UNIX systems. He calls it 'csh' or the
'hamilton csh', but it's not a csh as it's neither bug nor feature
compatible with the real csh. Actually, he's fixed a great deal, but
in doing so, has created a totally different shell.
--
Tom Christiansen Perl Consultant, Gamer, Hiker
[email protected]
