1. 前言 現在,越來越多的人在一台使用Linux 和 Windows. 這應該說是Linux的勝利. 我們知 道, Linux 要使用交換分區， Windows 要使用交換文件。如果一台PIII, 有192M 內存，我們分配給Linux 192M 交換 區， Windows 2000 至少要 200M. 那麼，我們要用近400M硬盤空間。如果交換區更大，浪費就更可觀了。 由於兩個系統的交換區都只是運行時的臨時數據,所以,我們采用動態修改分區信息的方法 來達到共享目的. 2. 方法簡介 1). 備份Windows 分區信息。 2). 當啟動Linux時， 將該分區做成Linux 交換區，並將其激活。 3） 當Linux 關閉時，將該分區重新變成Windows 交換區。 3. 具體步驟 1). 分區 Fdisk, 只分主分區, 不分擴展分區 2). 安裝 Windows. 3). 安裝Linux (占一個主分區) 4). 在Linux 下, 分擴展分區) 5). 設定Linux交換區(假定/dev/hda10) 6). 建立winswap 設備 ln -s /dev/hda10 /dev/winswap 7). 啟動Linux, 關閉交換區 # swapoff -a 8). 從文件安裝表中刪除該分區 vi /etc/fstab 注釋掉該行 (/dev/hda10) 9). 將該分區該成 FAT16 或其他 DOS 分區. 10). 啟動 Windows a). 格式化該分區 b). 將系統的交換文件設在該分區. 11). 啟動 Linux, 計算Total Special Sectors 公式: T = r + (s * f) + (d / 16) 參數: Reserved Sectors at beginning : r FAT Copies : f Sectors per FAT : s Root Directory entries : d 參見: msinfo.sh 注解: 可以運行 msinfo.sh 來獲得. # msinfo.sh /dev/hda10 12). 備份Windows 分區信息 # dd if=/dev/winswap bs=512 count=XXX gzip -9 > /etc/winswap.gz 這裡, XXX = T 14). 編寫啟動, 退出腳本, 並把它們放在 /etc/rc.d/xxx. 可用 grep -nr * grep swapon (或 swapoff) 來找系統激活和關閉交換區, 將它們 替換稱我們 的腳本) 我們在附錄中提供了啟動和關閉的腳本. 4. 附加說明 1. 本文使用的是FAT16, 如果使用NTFS 或其它, 必須修改腳本. 2. mkswap /dev/winswap 377496 (這個值需要修改, 依照你的分區大小) 5. 參考資料: Linux HOWTO: Swap-space 6. 附錄 -- 相應的腳本 1. msinfo.sh 腳本 #!/bin/sh # # msinfo.sh This shell script displays the boot sector of the # given partition. # # Author: Rahul U. Joshi # # Modifications Removed the use of eXPr and replaced it by the let # command. # check for command line arguments if [ $# -ne 1 ]; then echo "Usage: msinfo " exit 1 fi # check whether the input name is a block device if [ ! -b $1 ]; then echo "msinfo: $1 is not a block device" exit 1 fi # create two temporary files for use TMPFILE=`mktemp -q /tmp/$0.XXXXXX` if [ $? -ne 0 ]; then echo "msinfo: Can't create temp file, exiting..." exit 1 fi TXTFILE=`mktemp -q /tmp/$0.XXXXXX` if [ $? -ne 0 ]; then echo "msinfo: Can't create temp file, exiting..." rm -f $TMPFILE exit 1 fi back_title="`printf "%78s" "msinfo, Information about FAT16 filesystem -- Rahul Joshi"`" dialog --title "Boot sector of $1" --backtitle "$back_title" --infobox "\nAnalysing boot sector for $1\nPlease wait ..." 14 60 # truncate TXTFILE to zero length echo > $TXTFILE # get Formatting DOS version dd 2>/dev/null if=$1 bs=1 count=8 skip=3 dd 2>/dev/null of=$TMPFILE printf >>$TXTFILE "%30s : %s\n" "Formatting DOS version" "`cat $TMPFILE`" # get file system dd 2>/dev/null if=$1 bs=1 count=8 skip=54 dd 2>/dev/null of=$TMPFILE printf >>$TXTFILE "%30s : %s\n" "Filesystem" "`cat $TMPFILE`" # check if filesystem in a FAT16 if [ "`cat $TMPFILE`" != "FAT16 " ]; then dialog --title "Boot sector of $1" --backtitle "$back_title" --infobox "\nCan't find a FAT16 filesystem on $1" 14 60 exit 2 fi # get volume label in boot sector dd 2>/dev/null if=$1 bs=1 count=11 skip=43 dd 2>/dev/null of=$TMPFILE printf >>$TXTFILE "%30s : %s\n" "Volume label in boot sector" "`cat $TMPFILE`" # get Sector size dd 2>/dev/null if=$1 bs=1 count=2 skip=11 od -An -tdS dd 2>/dev/null of=$TMPFILE printf >>$TXTFILE "%30s : %d\n" "Sector size" `cat $TMPFILE` sector_size=`cat $TMPFILE` # get Reserved sectors dd 2>/dev/null if=$1 bs=1 count=2 skip=14 od -An -tdS dd 2>/dev/null of=$TMPFILE printf >>$TXTFILE "%30s : %d\n" " Reserved sectors" `cat $TMPFILE` reserved_sectors=`cat $TMPFILE` # get FAT sectors dd 2>/dev/null if=$1 bs=1 count=1 skip=16 od -An -tdS dd 2>/dev/null of=$TMPFILE fat_count=`cat $TMPFILE` dd 2>/dev/null if=$1 bs=1 count=2 skip=22 od -An -tdS dd 2>/dev/null of=$TMPFILE sectors_per_fat=`cat $TMPFILE` # calculate the no of sectors allocated for FAT's let fat_sectors=fat_count*sectors_per_fat printf >>$TXTFILE "%30s : %u (%u x %u) \n" "FAT sectors" "$fat_sectors" "$fat_count" "$sectors_per_fat" # get root directory sectors dd 2>/dev/null if=$1 bs=1 count=2 skip=17 od -An -tdS dd 2>/dev/null of=$TMPFILE root_sectors=`cat $TMPFILE` # calculate the no of sectors allocated for root directory let root_sectors=root_sectors*32/sector_size printf >>$TXTFILE "%30s : %u\n" "Root directory sectors" "$root_sectors" # get Total special sectors let total=reserved_sectors+fat_sectors+root_sectors printf >>$TXTFILE "%30s : %u\n" "Total special sectors" "$total" # display the information in a message box dialog --title "Boot sector of $1" --backtitle "$back_title" --msgbox "`cat $TXTFILE`" 14 60 # delete temporary files rm -f $TMPFILE rm -f $TXTFILE # end of msinfo.sh 2. swapinit.sh #!/bin/sh # # /etc/rc.d/init.d/swapinit.sh - activate the swap partition # # written by Rahul U. Joshi # Verify and initialize swap space # echo -n 'Verifying swap space... ' loopcount=0 # flag to indicate whether the partition has been activated or not activated=0 # check for signatures 6 times before giving up while [ $loopcount -lt 6 ] do if [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=10 skip=4086`" = 'SWAPSPACE2' ]; then echo "Linux signature found, iteration $loopcount" echo "Activating swap partitions" swapon /dev/winswap activated=1 break elif [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=5 skip=54`" = 'FAT16' ]; then echo "DOS signature found, iteration $loopcount" echo "Making swap partition" mkswap /dev/winswap 377496 echo "Activating swap partitions" swapon /dev/winswap activated=1 break else let loopcount=loopcount+1 fi done if [ $activated -ne 1 ] ; then echo "Swap signature not found after $loopcount tries" echo "No swapping partitions activated" exit 1 fi 3. swaphalt.sh #!/bin/sh # # /etc/rc.d/init.d/swapinit.sh - activate the swap partition # # written by Rahul U. Joshi # Verify and initialize swap space # echo -n 'Verifying swap space... ' loopcount=0 # flag to indicate whether the partition has been activated or not activated=0 # check for signatures 6 times before giving up while [ $loopcount -lt 6 ] do if [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=10 skip=4086`" = 'SWAPSPACE2' ]; then echo "Linux signature found, iteration $loopcount" echo "Activating swap partitions" swapon /dev/winswap activated=1 break elif [ "`/bin/dd 2>/dev/null if=/dev/winswap bs=1 count=5 skip=54`" = 'FAT16' ]; then echo "DOS signature found, iteration $loopcount" echo "Making swap partition" mkswap /dev/winswap 377496 echo "Activating swap partitions" swapon /dev/winswap activated=1 break else let loopcount=loopcount+1 fi done if [ $activated -ne 1 ] ; then echo "Swap signature not found after $loopcount tries" echo "No swapping partitions activated" exit 1 fi
