歡迎來到Linux教程網
Linux教程網
Linux教程網
Linux教程網
您现在的位置: Linux教程網 >> UnixLinux >  >> Linux綜合 >> Linux資訊 >> 更多Linux

Linux操作系統下關於兩種時鐘設置的問題

以下內容是關於幫助你在Linux下設置日期和時間的一些步驟,也包含了一點ntpd時間同步的內容。特別提醒的是在發行版本的限制是red hat系列,包括fedora,centos,redflag,unbreakable linux等。

There are two clocks to configure in Linux, the hardware clock and the system clock. The hardware clock determines the system clock on system boot. While the system is running, changes to one of these doesn't affect the other.

在Linux下有兩個時鐘需要配置,硬件時鐘和系統時鐘。硬件時鐘在系統啟動時決定系統時鐘,當系統處於運行狀態下時,修改其中任何一個並不能對另一個默認生效。

Note: it's best to set the hardware clock and have the system clock be set upon a reboot. Changing the system clock by using the date program on a running system could cause date discontinuities and consequently problems. If you will be using ntpd, you probably don't need to set either of these clocks (unless the current time is more than 1000s off the real time). Just setup ntpd and let ntpd adjust the time (it will do it in small steps to keep system timestamps reliable).

現在大部分的發行版本在圖形界面下都提供了時鐘設置工具,例如kde,gnome都有友好的 圖形化工具,這裡就不多說了。

You can use timeconfig to configure the timezone and UTC settings. Timeconfig will update /etc/sysconfig/clock and /etc/localtime.

Set the time zone manually if not already set.

Linux uses the file /etc/localtime to determine the time zone. This file should be either a copy of the appropriate timezone file from the Directory /usr/share/zoneinfo or a symbolic link. If your time zone is incorrect, create a symbolic link to the appropriate timezone file.

# ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
Set whether hwclock uses local time or UTC

Edit the file /etc/sysconfig/clock and change "UTC=" to true or false.
If you have a dual-boot system with Windows, using UTC may cause problems for Windows.

Set the system clock

# date MMDDhhmmCCYY.ss
where MM is month, DD is day, hh is hour, mm is minutes,
CCYY is year and ss is seconds. Time should be in 24-hour notation.

To only set the time:

# date -s hh:mm:ss
Set the hardware clock

To set the hardware clock to the current system clock:

# setclock
this method looks at /etc/sysconfig/clock to determine whether the hardware clock is set to UTC

Another method:

# hwclock --systohc# hwclock --systohc --utc
use the second option if you use UTC.

Set hwclock manually:

# hwclock --set --date="9/22/96 16:45:05"
Everytime you use the hwclock --set command,
it will create or edit the file /etc/adjtime to determine the systematic drift.
Once you have some history,
you can use the --adjust option to adjust the hardware clock appropriately.



Run as a cron job if you want the clock to adjust automatically on a regular schedule.
Don't use the --adjust function when using ntpd since ntpd will turn the "11 minute mode" on,
which is best left alone. See the hwclock manpage for more info.

Setup ntpd for automatic synchronization with a remote server.

Run Red Hat's setup utility to make ntpd start on boot up and edit /etc/ntp.conf

Set server and fudge options:

server time.nist.govfudge  time.nist.gov stratum 10
Enable multicastclient:

multicastclient     # listen on default 224.0.1.1
Edit /etc/sysconfig/ntpd if necessary. The default should be fine.

Start the ntpd daemon:

# service ntpd start



Copyright © Linux教程網 All Rights Reserved