這是從網上down下來的一個串口通信類，發現close函數忘記了設置Opened屬性為false
還有後面string轉byte[]和byte[]轉string的函數有錯誤，索性刪掉了
修改後的串口通信類如下：
下一篇將把我的測試程序主程序部分全部代碼貼出來
可以堅強勇敢的用來實現串口通信。
using System;
using System.Runtime.InteropServices;
namespace BusApp
{
/// <summary>
///
/// </summary>
public class mycom
{
public mycom()
{
//
// TODO: 在此處添加構造函數邏輯
//
}
public int PortNum; //1,2,3,4
public int BaudRate; //1200,2400,4800,9600
public byte ByteSize; //8 bits
public byte Parity; // 0-4=no,odd,even,mark,space
public byte StopBits; // 0,1,2 = 1, 1.5, 2
public int ReadTimeout; //10
//comm port win32 file handle
private int hComm = -1;
public bool Opened = false;
//win32 api constants
private const uint GENERIC_READ = 0x80000000;
private const uint GENERIC_WRITE = 0x40000000;
private const int OPEN_EXISTING = 3;
private const int INVALID_HANDLE_VALUE = -1;
[StructLayout(LayoutKind.Sequential)]
private struct DCB
{
//taken from c struct in platform sdk
public int DCBlength; // sizeof(DCB)
public int BaudRate; // current baud rate
public int fBinary; // binary mode, no EOF check
public int fParity; // enable parity checking
public int fOutxCtsFlow; // CTS output flow control
public int fOutxDsrFlow; // DSR output flow control
public int fDtrControl; // DTR flow control type
public int fDsrSensitivity; // DSR sensitivity
public int fTXContinueOnXoff; // XOFF continues Tx
public int fOutX; // XON/XOFF out flow control
public int fInX; // XON/XOFF in flow control
public int fErrorChar; // enable error replacement
public int fNull; // enable null stripping
public int fRtsControl; // RTS flow control
public int fAbortOnError; // abort on error
public int fDummy2; // reserved
public ushort wReserved; // not currently used
public ushort XonLim; // transmit XON threshold
public ushort XoffLim; // transmit XOFF threshold
public byte ByteSize; // number of bits/byte, 4-8
public byte Parity; // 0-4=no,odd,even,mark,space
public byte StopBits; // 0,1,2 = 1, 1.5, 2
public char XonChar; // Tx and Rx XON character
public char XoffChar; // Tx and Rx XOFF character
public char ErrorChar; // error replacement character
public char EofChar; // end of input character
public char EvtChar; // received event character
public ushort wReserved1; // reserved; do not use
}
[StructLayout(LayoutKind.Sequential)]
private struct COMMTIMEOUTS
{
public int ReadIntervalTimeout;
public int ReadTotalTimeoutMultiplier;
public int ReadTotalTimeoutConstant;
public int WriteTotalTimeoutMultiplier;
public int WriteTotalTimeoutConstant;
}
[StructLayout(LayoutKind.Sequential)]
private struct OVERLAPPED
{
public int Internal;
public int InternalHigh;
public int Offset;
public int OffsetHigh;
public int hEvent;
}
[DllImport("kernel32.dll")]
private static extern int CreateFile(
string lpFileName, // file name
uint dwDesiredAccess, // access mode
int dwShareMode, // share mode
int lpSecurityAttributes, // SD
int dwCreationDisposition, // how to create
int dwFlagsAndAttributes, // file attributes
int hTemplateFile // handle to template file
);
[DllImport("kernel32.dll")]
private static extern bool GetCommState(
int hFile, // handle to communications device
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool BuildCommDCB(
string lpDef, // device-control string
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool SetCommState(
int hFile, // handle to communications device
ref DCB lpDCB // device-control block
);
[DllImport("kernel32.dll")]
private static extern bool GetCommTimeouts(
int hFile, // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool SetCommTimeouts(
int hFile, // handle to comm device
ref COMMTIMEOUTS lpCommTimeouts // time-out values
);
[DllImport("kernel32.dll")]
private static extern bool ReadFile(
int hFile, // handle to file
byte[] lpBuffer, // data buffer
int nNumberOfBytesToRead, // number of bytes to read
ref int lpNumberOfBytesRead, // number of bytes read
ref OVERLAPPED lpOverlapped // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool WriteFile(
int hFile, // handle to file
byte[] lpBuffer, // data buffer
int nNumberOfBytesToWrite, // number of bytes to write
ref int lpNumberOfBytesWritten, // number of bytes written
ref OVERLAPPED lpOverlapped // overlapped buffer
);
[DllImport("kernel32.dll")]
private static extern bool CloseHandle(
int hObject // handle to object
);
public void Open()
{
DCB dcbCommPort = new DCB();
COMMTIMEOUTS ctoCommPort = new COMMTIMEOUTS();
// OPEN THE COMM PORT.
hComm = CreateFile("COM" + PortNum ,GENERIC_READ | GENERIC_WRITE,0, 0,OPEN_EXISTING,0,0);
// IF THE PORT CANNOT BE OPENED, BAIL OUT.
if(hComm == INVALID_HANDLE_VALUE)
{
throw(new ApplicationException("Comm Port Can Not Be Opened"));
}
// SET THE COMM TIMEOUTS.
GetCommTimeouts(hComm,ref ctoCommPort);
ctoCommPort.ReadTotalTimeoutConstant = ReadTimeout;
ctoCommPort.ReadTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutMultiplier = 0;
ctoCommPort.WriteTotalTimeoutConstant = 0;
SetCommTimeouts(hComm,ref ctoCommPort);
// SET BAUD RATE, PARITY, WORD SIZE, AND STOP BITS.
// THERE ARE OTHER WAYS OF DOING SETTING THESE BUT THIS IS THE EASIEST.
// IF YOU WANT TO LATER ADD CODE FOR OTHER BAUD RATES, REMEMBER
// THAT THE ARGUMENT FOR BuildCommDCB MUST BE A POINTER TO A STRING.
// ALSO NOTE THAT BuildCommDCB() DEFAULTS TO NO HANDSHAKING.
dcbCommPort.DCBlength = Marshal.SizeOf(dcbCommPort);
GetCommState(hComm, ref dcbCommPort);
dcbCommPort.BaudRate=BaudRate;
dcbCommPort.Parity=Parity;
dcbCommPort.ByteSize=ByteSize;
dcbCommPort.StopBits=StopBits;
SetCommState(hComm, ref dcbCommPort);
Opened = true;
}
public void Close()
{
if (hComm!=INVALID_HANDLE_VALUE)
{
CloseHandle(hComm);
Opened=false;
}
}
public byte[] Read(int NumBytes)
{
byte[] BufBytes;
byte[] OutBytes;
BufBytes = new byte[NumBytes];
if (hComm!=INVALID_HANDLE_VALUE)
{
OVERLAPPED ovlCommPort = new OVERLAPPED();
int BytesRead=0;
ReadFile(hComm,BufBytes,NumBytes,ref BytesRead,ref ovlCommPort);
OutBytes = new byte[BytesRead];
Array.Copy(BufBytes,OutBytes,BytesRead);
}
else
{
throw(new ApplicationException("Comm Port Not Open"));
}
return OutBytes;
}
public int Write(byte[] WriteBytes)
{
int BytesWritten = 0;
if (hComm!=INVALID_HANDLE_VALUE)
{
OVERLAPPED ovlCommPort = new OVERLAPPED();
WriteFile(hComm,WriteBytes,WriteBytes.Length,ref BytesWritten,ref ovlCommPort);
}
else
{
throw(new ApplicationException("Comm Port Not Open"));
}
return BytesWritten;
}
}
}