1. 下載、編譯安裝必須的軟件包
wget http://rt2×00.serialmonkey.com/rt73-cvs-daily.tar.gz
tar -xvzf rt73-cvs-daily.tar.gz
sudo aptitude install build-essential linux-headers-`uname -r`cd rt73-cvs-yyyymmddhh/Modulesudo
make sudo
make install
2. 修復module沖突
sudo modprobe -r rt73usb
sudo modprobe -r rt2570
sudo modprobe -r rt2500usb
sudo modprobe -r rt2×00lib
編輯blacklist文件:
sudo nano /etc/modprobe.d/blacklist加入:
# Blacklist rt73usb, as it is a non-functional beta module which conflicts with the working rt73 module.
blacklist rt73usb
# Blacklist rt2570, as it causes conflicts with rt73
blacklist rt2570
# Other modules that break rt73
blacklist rt2500usb
blacklist rt2×00lib
安裝模塊
sudo modprobe -v rt73
3. 配置網絡接口
sudo nano /etc/network/interface加入:
auto rausb0 iface rausb0inet dhcp pre-up
ifconfig rausb0 up pre-up
iwconfig rausb0 essid “YOUR_ESSID”
按照上面的幫助一步一步操作下來還是不能識別,重啟後無線網卡識別了,不過還是不能撥號。於是又用圖形界面繼續配置了密碼等信息,不一會就正常撥號了。
建議在命令行安裝驅動,等網卡識別了,再在圖形界面配置用戶名密碼等信息