在LinuxSIR和LINUXFANS上看了很多關於ADSL的文章,都沒有解決我的REDHAT9上ADSL上網的問題,今天實在是沒有辦法,重新建立連接,曲折的經歷,終於上網了(非常激動,可能表達的不是很好),特的寫下我的過程,作為參考: REDHAT默認的PPPOE有問題,需要RPM -E,然後,安裝這個 http://www.roaringpenguin.com/pppoe/rp-pppoe-3.5.tar.gz(北南兄推薦) 解壓和安裝： #tar zxvf rp-pppoe-3.5.tar.gz 進入解壓目錄執行 #sh ./go 然後再來設置ADSL。這一處，我們要用命令。 #adsl-setup Welcome to the Roaring Penguin ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly... Looks good! Now, please enter some information: USER NAME >>> Enter your PPPoE user name (default XXX): 在這裡輸入ADSL的用戶名 INTERFACE >>> Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethn, where 'n' is a number. (default eth0):如果一張網卡就設置寫上eth0 Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. >>> Enter the demand value (default no):不用寫什麼 DNS Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup. >>> Enter the DNS information here:在這裡寫上202.96.134.133 下一個DNS是202.96.168.68 //這裡根據個人不同可以修改 PASSWord >>> Please enter your PPPoE password:輸入密碼 >>> Please re-enter your PPPoE password:再輸入一次 FIREWALLING Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny Access to all standard servers like Web, e-mail, FTP, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port. The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN >>> Choose a type of firewall (0-2):這裡添寫為2 ** Summary of what you entered ** Ethernet Interface: eth0 User name: XXX Activate-on-demand: No DNS: Do not adjust Firewalling: MASQUERADE >>> Accept these settings and adjust configuration files (y/n)? 弄完後，就按一個y鍵。 (以上為北南兄文章裡面內容) 不要急於連接,REBOOT -N 然後進入網絡設置,設置ETH1固定IP，停止ETH1(我的是用他) 然後ADSL-START PING 你的DNS,如果可以,那麼,恭喜你! 如果不行，REBOOT -N ADSL-START,這下沒問題啦，盡情享受吧！ 其中部分內容可能不同,僅作參考,主要在連接後,能夠PING通DNS即可!
